1. Wash hands before preparing formula and ensure the formula is prepared in a clean area.
  2. Wash bottles, teats and caps. Sterilise by boiling for 5 minutes or use an approved sterilising agent.
  3. Boil fresh drinking water and allow it to cool until lukewarm (usually around 30 minutes).
  4. Follow the feeding guide on the tin for number of scoops and mls of water required for one serve.
  5. Use only the enclosed scoop. Always use a dry scoop. Fill the scoop lightly and level off using the built-in leveller. Stir or shake briskly to dissolve the powder.
  6. Test the temperature of the formula with a few drops on the inside of the wrist. It should feel just warm, but cool is better than too hot.
  7. Serve immediately. Discard unfinished drinks